Your System Guide – Unleash the Magic
Controls
Connections
1 infrared remote control
2 wifi light white
3 bluetooth light blue
4 line in light green
5 USB light red
6 bass: subwoofer volume, short press to reset bass level
7 treble: high frequency volume, short press to reset treble level
8 volume: short press to switch input mode: wifi, BT, line, USB
9 24V, 4.5A
10 SW: subwoofer output
11 LS: left loudspeaker output
12 RS: right loudspeaker output
13 ethernet: connection via local area network (LAN)
14 USB player: FLAC/MP3/AAC/AAC+/ALAC/APE/WAV
15 computer: audio from your computer with USB cable
16 SPDIF: Sony/Philips digital interface
17 line in: analog 3.5mm. 4 pin connector
18 power: short press once: switch input mode
18 power: long press: switch on/off
18 power: short press twice: re-pair wifi or bluetooth in wifi or bluetooth mode
18 power: short press three times: restore to factory settings
Up2Stream wireless amplifier
1. Short press button 8 or 18 to choose your input mode.
Network (wifi or LAN) – white light
Bluetooth – blue light
Line in or optical – green light
USB computer connection – red light
Connect network via wifi or LAN
Plug in the wired cable to the RJ45 ethernet, the device will show on the app in about 10 seconds. (Note: the cell phone and the device must be in the same network.)
Seamless multiroom streaming. Sync audio in every room or play different music in each room.
Download the 4STREAM App at App Store for iOS based devices or at Google Play Store for Android. The application supports English, Spanish, French, German, Italian, Portugese, Korean, Simplified Chinese, Traditional Chinese and Japanese.
Wire the connectors on the Up2Stream
amplifier, connect + and – terminals with the + and – terminals on your speaker.
1. Hold the power button while plugging in the power cable.
2. The white light will start flashing. Release the button and wait untill the white light flashes slowly.
3. Make sure your mobile has connected to your home network using 2.4G and your GPS and bluetooth is on.
4. Open 4Stream App. For Android device, the system will ask for permission to use GPS data & file storage, please click accept to continue. This GPS permission is setup by Google for bluetooth usage, once setup is finished you can go to system settings and disable it, file storage permission is to let 4Stream App access your mp3 files stored in your mobile phone.
5. 4Stream App will list out all the devices available for setup, choose the one you want.
6. 4Stream App will then ask you to choose the network you want the device to connect to, choose the one you want to connect.
7. Now enter password for your network, if this is not the network you want the device to connect, you can change it to the desire one.
8. Once connection is finished, it will automatically check for new updates.
9. You can change the name of the device. Select a preset one or enter your own.
10. After you define the name of the device, you will see it appears in the device list in 4stream App and now you can start streaming music. *If you change to another router, or the password of the connected router has been changed, please long press power button for 5 secs in wifi mode to reset the connection. *Hold power button while plugging in the power can force the device to enter wifi mode. If you have setup the router connection before, the device will auto-connect to that router.
Connect with Bluetooth
Switch to bluetooth via 4STREAM App or by remote controller. Find “SoundSystem_XXXX” from your phone bluetooth setting and pair it.
Audio from computer with USB
15 – Audio from your computer with USB cable
The computer will automatically discover an USB sound card. When you activated it as the system main output, the computer will send the audio over the Up2Stream amplifier. (Make sure it’s a data cable including the signal wires.) You can stream to other Up2Stream amplifiers over multiroom connection. There’s about 3 seconds delay when connected to more Up2Stream amplifiers.
Firmware Update
The application will notify you in the 4STREAM App when there is a new firmware version available. It’s recommended to update firmware whenever available as this might not only correct bugs or improve security, but also can add new features or services.
Another way to setup wifi
1. Hold the power button while plugging in the power cable.
2. The white light will start flashing. Release the button and wait untill the white ligh flashes slowly.
3. Go to your mobile wifi settings and search for “SoundSystem_xxxx” and connect. *If you cannot find “SoundSystem_xxxx”, long press the power button for 5 seconds and then refresh your mobile’s wifi listing.
4. Open 4Stream App and there will be 2 options: Direct Mode & Add Device.
5. Direct Mode: If you don’t have a router, please choose direct mode. After connected, you can play music from your mobile.
6. Add Device: Select the router SSID you want your Up2stream amplifier to connect to (enter password if required) and select continue.
7. Once connected, you can change the name of the Up2stream amplifier. You can select a preset one or enter your own.
8. It appears in the device list in 4stream App and now you can start streaming music.